AUTONET TV

The Need for Speed (Wheel Speed Sensor Maintenance)

Today's vehicles have some pretty amazing technology in them, including a computerized braking system we all pretty much take for granted these days.  Antilock brake systems (ABS) have been around for years but they help drivers stop in much shorter distances reliably than ever before.  When you see your ABS warning light come on, it's important to find out what's causing the problem. It's a safety issue.

Often the problem when the ABS light comes on is a faulty wheel speed sensor.  (In some cases the traction control light will also come on, perhaps because of a non-working wheel speed sensor.) Your vehicle uses the speed sensors to measure the rotational speed at each wheel. That sensor sends the speed data to a computer that can then adjust braking power and prevent your wheels from locking up. 

If any of the wheel speed sensors isn't working right, the ABS warning light will go on and the vehicle's computer will turn off the antilock brake system.  You'll still have working brakes, but you will lose the functionality of that computerized system.

When your vehicle warns you the ABS has a non-working sensor, you can have a technician check to see what's going on. It could be one of the sensors is dirty and a cleaning will solve the problem.  But it also could be that one or more sensors needs to be replaced. 

A technician will use computerized diagnostic equipment to determine what and where the problem is, replace any bad parts and then check to make sure the system is fully operational. 

Antilock brakes and traction control are significant technologies that help prevent your vehicle from slipping on less-than-perfect road surfaces, especially useful during wintery weather.  Make sure they're helping you drive the way they designed to.

McPherson Automotive
1 E Park St
Du Quoin, IL 62832
(618) 542-9203
http://www.mcphersonautomotive.net

Before You Buy that Used Vehicle (Having a Used Car Inspected Before Buying)

Let's face it.  New vehicles are expensive, so finding a good used one can save drivers a lot of money.  It's tempting to look through ads, find a private seller who has what you're looking for and pay a price you think is a great deal.  But when you go over to look at a used car, do you really know what to look for to uncover potential problems with it?

The answer is probably no.  Used cars can look great on the outside, maybe even have lustrous paint and a super clean interior. But is it possible that vehicle's been in an accident? Does it have electrical problems you can't detect easily? Is any fluid leaking that you don't know about?

Think about it.  You are about to spend thousands of dollars for a complex machine and you're considering judging its condition without much expertise.  That's why it makes sense to have a qualified technician inspect any used vehicle you're considering buying.

Many vehicle repair facilities will do it for around $100-$200.  They'll check to see what's working right and what's not working.  They'll check for leaks and how strong the battery is; they'll look for signs it's been in an accident or has been painted. They'll look in places you'd find inaccessible, and they'll take it for a test drive to see what noises, vibrations and smells might give clues to any major problems.  An inspection usually takes about an hour.

You should have an inspection done by a technician you know and trust.  They'll have your best interests in mind.  And the inspection should be done before you start negotiating a price with the seller.  It's money well spent to either give you peace of mind that you're getting a good vehicle or steer you away from a lemon. 

One sign a used vehicle isn't a good deal? If the buyer refuses to let you have it inspected.  That says just about everything that needs to be said.    

McPherson Automotive
1 E Park St
Du Quoin, IL 62832
(618) 542-9203
http://www.mcphersonautomotive.net

What is a TPS? (Throttle Position Sensor)

You know you have an accelerator pedal; step on it and your vehicle is supposed to go.  But did you know there is a part in your vehicle that keeps track of where the throttle is? It's called the Throttle Position Sensor, or TPS.

The TPS is a sensor that helps your vehicle figure out the right mix of air and fuel is reaching your engine.  It does that by keeping track of the throttle and sending that information to your vehicle's computer.  Other factors play a role in how well your engine is performing, including air temperature, how fast the engine is turning over and air flow. 

When the TPS isn't working right, you may find your vehicle won't accelerate or doesn't have the power you're expecting when you press on the accelerator.  In some cases, it may accelerate on its own.  Sometimes your vehicle won't go over a certain speed.  Your Check Engine light may go on.

Any of these symptoms should be checked out soon.  If your TPS stops working right, your vehicle may not be safe to drive.  Fortunately, most vehicles have a "limp home" mode that will allow you to get off a busy road to a safe spot. 

Your service advisor can let you know which TPS is the correct replacement for your vehicle.  Your shop may have to re-program the new TPS so it works correctly with other software in your vehicle.

It's a fact of life these days that computers control many of a vehicle's functions. The sensors that feed information to those computers help make your vehicle work the way it was engineered to and keep you motoring down the road safely and efficiently.

McPherson Automotive
1 E Park St
Du Quoin, IL 62832
(618) 542-9203
http://www.mcphersonautomotive.net